SPECIFICATIONS:
Dimension of each module: 5.4 cm (2.12") x 1.17 cm (0.46") x1.4 cm (.063")

Power: 150 watts (5 Volts DC @ 30 Amps) per module 
Operation Frequency: 250 Khz

SCHEMATIC:

  Schematic diagram of a flat transformer-inductor module.

The secondary is configured as push-pull buck converter output, requiring only the addition of a filter capacitor. Primary windings are threaded through all the modules later. Terminals are provided for direct connection to TO-247 dual rectifier for minimum lead inductance. Top and bottom surfaces are output conductors.
 

• N = Number of modules placed side by side with through holes aligned.
• P = Number of primary windings through all the modules
• Example: For a turn ratio of 8:1, 600 watts.
• Use N = 4 modules, P = 2 turns primary through all modules